ZHEJIANG SENLEI MECHANICAL & ELECTRICAL CO.,LTD
ADD：Pengjie Industrial Park of Luqiao District of Taizhou City，Zhejiang province China.
Air compressor cooling methods, generally water-cooled and air-cooled two. These two ways is hard to say what is better, can only say that is used in what circumstances. Lok on the air compressor of the two cooling methods to do a comparison for everyone to judge their own choice:
The so-called water-cooled cooling method is the use of cooling water flow and temperature difference to the air compressor equipment to maintain a certain temperature range. Its advantages and disadvantages are as follows:
1, because the cooling water has a certain cleaning effect, so its internal flow in the air compressor, the device can play a clean internal role. Help to extend the maintenance cycle of equipment and improve the quality of compressed gas;
2, water cooling machine adaptability to climate change, increase or reduce the water pressure can adapt to the strong changes in temperature;
3, dusty environment, such as textile, spraying, carbon black, titanium dioxide and other industries, with water-cooled machine more reliable;
4, water cooler cooler, easy to clean the oil side, air-cooled machine can not.
1, limited by the water resources, so the scope of application is relatively narrow;
2, cooling water may contain calcium, magnesium and other ions, and these things easily in the cooler due to high temperature and chemical reaction, and finally in the cooler to form scale, thus affecting the cooling efficiency of the cooler.
The so-called air-cooled cooling method is the use of air flow away heat, so that the air compressor is always maintained in the appropriate temperature range. Its advantages and disadvantages are as follows:
The biggest advantage of air-cooled cooling is that it is not affected by environmental factors and is basically used in any area.
1, if the surrounding air quality is not good, it is easy for the entire air compressor and compressed air pollution, so in order to avoid such a situation, it is recommended that the best load filter equipment;
2, if used in a closed space, it is recommended to install into, exhaust equipment;
3, the cooling effect, the quality is not as water-cooled.
If it is not in a particularly dry environment, it is recommended to choose water-cooled. Because the air-cooled structure is simple, less investment, but due to conditions, poor cooling effect, and more for small air compressor. Although the water-cooled structure is complex, technical requirements are high, but the cooling effect is significant, easy to adjust, work reliably, so large, medium-sized air compressor with water-cooled.